NEXT PIR MCW

Wireless PowerCode True Digital Passive Infrared Detector

APPLICATIONS
Residential and Commercial

FEATURES

* Advanced true digital technology for long-term stability and reliability
* Dual element low-noise pyroelectric sensor
* 12m (40ft) 90º multiple-curtain coverage with “wall” creep zone
* Adjustment-free fast installation
* Sealed chamber protects the optical system
* Microprocessor-controlled temperature compensation
* Compliance with the directive 1999/5/EC of the European Parliament
* Fully supervised
* Very attractive, modern and elegant design
* "Smart" anti-collision transmission sequence
* Programmable pulse counter
* Reporting of dual front cover and back tamper and alarm status
* Low battery indication
* White light protection
* Automatic 15 minute interval test transmission and re-arm
* Long-life lithium battery
* Encoded from over 16 million different code combinations
* Compatible with all PowerCode™ receivers

The advanced True Motion Recognition (TM) algorithm (patented) allows the NEXT MCW to distinguish between the true motion of an intruder and any other disturbances which may cause false alarms.  An onboard motion event jumper determines whether 1 or 2 consecutive motion events triggers an alarm. 

SPECIFICATIONS
OPTICAL
Lens Data: No. of Beams: 9 + 5; Field-of-View: 90°
Max Coverage: 12 x 12 m (40 x 40 ft)
Vertical Adjustment: +2° to –12°
ELECTRICAL 
Battery Type: 3.0 V lithium Battery (LiSOCl2) battery, TTS-3L21
Nominal Battery Capacity: 1.45 Ah
Standby Current Drain: 0.025 mA 
Transmit Current Drain: 20.0 mA (including LED)
Battery Life (with LED on)
Typically over 3 years
LED: Lights for 2 seconds upon transmission and upon motion detection in walk-test mode
Detector: Dual-element, low-noise pyroelectric sensor 
Pulse Counter: Programmable to 1 or 2 pulses
Re-arm Timer: 2 minutes after last alarm; timer disabled in walk-test mode
WIRELESS
Frequency (MHz): 433.92 or 868
Transmission Sequence: 3 data bursts at variable intervals within 3 seconds
Encoding: 24-bit factory-selected ID code, over 16 million combinations
Message Length: 36 bits
Battery Supervision: Automatic low-battery status report with each alarm and with periodic autotest
Tamper Alert: Reported at 3-minute intervals, until tamper switch is restored
ENVIRONMENTAL
Operating Temperature: -10°C to 50°C (14°F to 122°F) 
Storage Temperature: -20°C to 60°C (-4°F to 140°F) 
RFI Protection: > 20 V/m up to 1000 MHz
PHYSICAL 
Weight: (with battery) 70g (2.5 oz)
Dimensions (H x W x D): 94.5 x 63.5 x 53.0
Color: White