MCT-211
Waterproof PowerCode™ wrist transmitter 

APPLICATIONS
* Personal safety
* High level security alarm
* Remote control systems

FEATURES
* UHF, single frequency transmission
* Wrist-worn
* Unique 24-bit ID code, over 6 million combinations
* Internal battery condition supervision and reporting
* Long-life internal battery
* Compatible with all Visonic Ltd PowerCode™ receivers


DESCRIPTION
MCT-211 is a miniature waterproof wrist-worn transmitter, for use in advanced alarm and remote control systems. When the push-button is pressed, the transmitter sends out a unique 24-bit ID code and an alarm code, identifiable by compatible receivers. 
All MCT-211 units are supplied with a wristband. Power is supplied by a 3-volt lithium battery. Low battery voltage is reported.


SPECIFICATIONS

Frequency (MHz): 315, 404, 418, 433.92 or other frequencies according to local requirements.
Modulation: ASK (ON-OFF keying)
Transmitter ID: 24-bit digital word, over 16 million possible code combinations, pulse width modulation
Total Message Length: 36 bits
Minimum Transmit Duration: 2 sec
Power Supply: 3-volt Lithium cell (Sanyo type CR-2025 or equivalent) 
Nominal Battery Capacity: 150 mAh
Current Consumption: 4.5 mA (during transmission), 1 µA in the standby mode
Battery Life: 3 to 5 years with about 3 transmissions per day; up to 10 years with one transmission per day or none at all
Battery Supervision: 
Good battery - LED lights steadily upon activation
Low battery - LED does not light upon activation
Note: If transmission is still possible despite the battery condition, the MCT-211 will send a low battery report to the receiver
Operating Temperature: 0°C to 50°C (32°F to 122°F)
Dimensions: 35 mm (1.4 in) 
Weight: 25 g (0.9 oz)
Color: Black
Standards: Meets FCC part 15, ETS 300-220, ETS 300-683 and MPT 1340