MKP-150
Fully supervised PowerCode™ 2-way wireless keypad

DESCRIPTION
The MKP-150 is an indoor, multi-button two-way keypad device for operation with the PowerMax+™ system.  The device operates using two-way encrypted coded transmission and shows acoustically and optically all relevant information about the system.  Due to the coded transmission, which is individually specified with each PowerMax+ control panel, an mkp-150 can operate only with a control panel. (Maximum two per panel)

The MKP-150 may be operated with an AC power pack (optional) or by battery power (2 batteries supplied).  With AC power the keypad communicates with the control panel continuously and constantly updates the data.  With battery operation the equipment enters sleep mode 15 seconds after last key press and is re-activated immediately and updated as soon as any key is pressed.

It enables the user to arm/disarm the alarm system, to initiate emergency/fire/panic alarms and to turn lighting devices on and off (X10 control).  

The ergonomic design, background lighting and the use of LED displays and acoustic signals makes the unit very user friendly.


Mkp-150 characteristics

ELECTRICAL DATA

Battery supply:
Two 3 V lithium batteries, type TTS-3L21

Battery life expectancy:
2 years (for typical use)

Plug power pack (optional):
230 VAC, 50Hz  9 VAC, 0,35 A min

Current consumption:
About 30 mA standby, 300 mA max. with full load.

Display:
Single-row, background-lit, 16-stelliges LCD display and 4 light emitting diodes (LED) indicators.

Control functions:
Home Arming, Away Arming, Bypass, Disarming, Latchkey, Light ON / Light OFF, Light Dim / Brightness, Recording, Aux, Forced Arming, Panic, Fire and Emergency calls.

Sleep mode (quiescent mode):
Used to minimise current consumption.  The unit enters sleep mode 15 seconds after last key use (applies only when using batteries or when there is a power failure).

Supervision monitoring message: Appropriate to local regulations a supervision signal is transmitted to the powermax control panel every 15 minutes (Europe) and/or every 60 minutes (for the USA) so as to provide warning of transmitter failure.  This function can be disabled.

Panic alarm transmission:
Activated by simultaneous pressing of the keys * and #fire

Tamper switch:
Normally closed. A tamper signal is transmitted in three ways: when the MKP- 150 case is opened; when the keypad assembly is separated from the mounting bracket or if the mkp150 unit is ripped off from the wall by burglar.

STANDARDS:
FCC part 15, EN of 50131-2 degrees of 2 Class II, and Directive 1999/5/EC

RF RADIO MODULE

Used frequencies: 433, 868 MHz or other frequencies according to regional regulations.
Receiver type: Super Heterodyne, fixes to frequency
Receiver range: 180 m (600 ft) in open space
Antennas type: Spatial
Coding: Two way wireless protocol

ENVIRONMENTAL

Only for the interior use.
Operating temperature: 0°C to 49°C (32°F to 120°F)
Storage temperature: -20°C to 60°C (-4°F to 140°F)
Air humidity: 85% relative air humidity, @ 30°C (86°F)

PHYSICAL DATA

Dimensions: 172 x 99 x 39 mm (6 7/8 x 3 15/16 x 1 9/16 in.)
Weight: 375 g. (13 oz)
Assembly place: Surface-mounted
Colour: Light-grey (Off-white)



Catalogue Prices

TTS Home Page